Cement Curb Sliding Machine
Cement curb sliding machine
Cement curb sliding machine

Cement curb sliding machine
The introduction of concrete curb slip-forming machine
Concrete curb sliding machine is an efficient equipment in road construction, which is specially used for building road curb and stone shoulder. It integrates mechanical vibration and automatic walking, simplifies the construction process, reduces costs, and is especially suitable for large-scale construction.
Main feature
Mechanized construction: direct compaction molding, saving labor and turnover materials.
Fast construction speed: continuous construction, improve efficiency.
High automation: automatic turning, walking, forming precision.
Molds can be customized to meet different engineering needs.
Excellent quality: high strength and stability of the formed curb.
Construction process
Lofting positioning: precisely release the middle pile and determine the curb boundary line.
Equipment positioning: Wet the base, move the sliding machine to the site.
Concrete placement: manual feed to hopper, start equipment.
Surface modification: add mortar, smooth surface treatment.
Health coverage: cover plastic sheet, auxiliary health.
Expansion joint and rainwater outlet: according to the provisions of the expansion joint and rainwater outlet.
Matters needing attention
Check electrical switch and motor operation.
Make sure electrical appliances are well insulated.
Clean hopper and mold residue.
Regular inspection and maintenance.
With its high efficiency, automation and high quality characteristics, the concrete curb sliding molding machine is gradually becoming the preferred equipment for modern road construction.
our products
Jining Feiyu Electromechanical Technology Co., Ltd.
Cement post machine
Cement column machine can be customized according to your needs, multiple columns are formed at the same time, saving time and cost, shortening construction period, high degree of automation, low production cost, simple and practical operation


Cement floor machine
The cement floor machine produced by our company can be customized according to your needs, and the finished product can be cut according to the building requirements, which can effectively reduce labor intensity and improve production efficiency
Cement wall board machine
Cement wall plate machine support customization, compared with other ways of production efficiency can be increased by 3-5 times, low labor intensity of workers, high board speed, dense texture, plate shape, accurate size.


Cement purlin machine
Cement purlin machine is made of cast iron girder, high forming density, smooth forming surface, small error, automatic walking automatic forming, fast board making speed, can produce several pieces at the same time, can be customized according to your needs
Electric three-wheel dump truck
The electric three-wheel dump truck has belt type three-wheel dump truck and winch type three-wheel dump truck, which can be customized according to your needs, the large battery can meet your production needs, and the customized cargo bucket can meet your engineering needs


JS500 cement mixer
JS500 cement mixer, can be customized according to your needs mixing system, automatic mixing, automatic discharge, save labor and improve production efficiency, with electric three-wheel unloading truck can not stop feeding equipment
Jining Feiyu electromechanical technology Co., LTD
our advantages
Professional customized service, efficient production quality assurance, technological innovation leading edge, after-sales high efficiency received praise, the market is broad to take the lead.
our products
We specialize in the production of cement column machine, cement floor machine, cement purlin machine, cement lintel machine, automatic mixing system, electric three-wheel unloading truck...

Jining Feiyu Electromechanical Technology Co., Ltd
Professional customized service, efficient production quality assurance, technological innovation leading edge, after-sales high efficiency won praise, the market is broad to take the lead
Jining Flying Rain Mechanical & Electrical Technology Co., Ltd. specializes in producing advanced machinery, including prestressed slab, purlin, lintel & wood forming machines, light wallboard equipment, cranes (truck-mounted & crawler types), sweepers, etc. Our designs are scientific, durable, and user-friendly, ensuring fast, high-quality production with cost savings and long service life, enhancing clients' competitiveness and profitability.
We prioritize quality, service, and customer satisfaction. Rapid parts delivery, 24/7 customer support, and lifelong maintenance ensure seamless operations. Our "customer-centric" approach offers comprehensive services, with "service as the core" to deliver maximum value. Quality focus and all-round customer care are our hallmarks. High-quality products, impeccable services, and competitive pricing are our principles. We strive for excellence in every aspect, partnering with clients for mutual success based on integrity, quality, and service.
Precautions in use
What you need to pay attention to in use!
Safe operation: Before operating the concrete curb sliding mold machine, be sure to wear personal protective equipment, such as safety hats, safety shoes, protective glasses, etc. Ensure that there are no idle personnel around the equipment to avoid accidental injury during construction.
Equipment inspection: Before each use, the electrical system, transmission mechanism, vibration device and other key components of the sliding die machine should be carefully checked to ensure that they are in good condition. At the same time, check whether the mold is intact to avoid mold damage during the construction process affecting the molding quality.
Concrete ratio: According to the construction requirements, reasonable allocation of concrete ratio to ensure that the concrete has good mobility and workability. Avoid too dry or too wet concrete, affecting the forming effect and the strength of the curb.
Construction speed control: In the operation process, the walking speed of the sliding mold machine should be reasonably controlled to ensure that the concrete can be evenly and fully filled with the mold. Too fast walking speed may lead to insufficient concrete filling and affect the molding quality of the curb.
Molding quality monitoring: In the construction process, we should pay close attention to the quality of the molding curb, timely find and deal with possible defects, such as bubbles, cracks, etc. At the same time, check the wear of the mold regularly, and replace the mold with serious wear in time to ensure the dimensional accuracy and appearance quality of the molding curb.
Equipment maintenance and maintenance: After the completion of construction, the concrete residue on the sliding form machine should be cleaned in time to avoid damage to the equipment caused by concrete solidification. Maintain the equipment regularly, check the wear of the electrical system, transmission mechanism and other parts, and replace the damaged parts in time to ensure the long-term stable operation of the equipment.
You may want to ask
Jining Feiyu electromechanical technology Co., LTD
Q:1.What is the main function of the concrete curb slip-forming machine?
A:The main function of the concrete curb slip-forming machine is to build the road curb and stone shoulder automatically and continuously. Through mechanical vibration and mold forming technology, the concrete is directly pressed into the mold to form a curb with a specified shape and size. This kind of equipment not only improves the construction efficiency, reduces the labor cost, but also ensures the quality and appearance consistency of the curb, and meets the high standard requirements of road construction. At the same time, the concrete curb slipform machine also has the characteristics of simple operation and strong flexibility, which can adapt to the needs of different road environments and construction conditions.
Q:2.What are the advantages of using a concrete curb slipform machine over traditional methods?
A:
The use of concrete curb slip-forming machine has many advantages compared with the traditional method, the following are specific aspects:
Construction efficiency significantly improved:
The concrete curb slip-forming machine can achieve continuous operation, the production is quite convenient, and the molding curb can be produced about 800 meters per day, greatly shortening the construction period.
The traditional method, which requires prefabrication of kerbs and then handling and installation, is not only time-consuming, but also inefficient.
Reduce costs:
The construction of slip-forming machine eliminates the limitation of prefabrication site and saves the cost of site construction and formwork.
Due to the fast construction speed, labor costs and machinery rental costs are reduced.
Strong integrity, reduce the ratio of damage to vehicles after collision, reduce maintenance costs.
Improve curb quality:
The sliding die machine adopts mechanical vibration and die forming technology, which can ensure the compactness and strength of the curb stone and is not easy to collapse.
The shape of the curb is smooth, the color is consistent, and the appearance is more beautiful.
The traditional method may lead to uneven quality of the curb due to the instability of manual operation.
High flexibility:
According to different construction needs and environmental conditions, different molds and parameters can be selected to achieve customized construction.
It can be constructed first after the completion of the cement stabilized base, and then paved with asphalt concrete, avoiding the waste of asphalt concrete and the cost of slotting.
Environmental protection and energy saving:
The construction site of slip-forming machine is civilized and simple, reducing noise and dust pollution.
Compared with traditional methods, material waste and energy consumption are reduced.
Easy to operate and maintain:
The sliding mould machine is easy to operate and more suitable for front-line workers.
The equipment is compact and easy to maintain and maintain.
In summary, compared with traditional methods, the use of concrete curb sliding formwork has significant advantages in construction efficiency, cost savings, curb quality, flexibility, environmental protection and energy saving, as well as operation and maintenance. These advantages make the sliding form machine widely used and recognized in modern road construction.
Q:3.How to ensure the construction quality of concrete curb slipform machine?
A:
To ensure the construction quality of the concrete curb slip-forming machine, you can start from the following aspects:
1. Preparation before construction
Make construction plan:
Make detailed slip-form construction plan, including construction sequence, process flow, use and maintenance of construction equipment, etc.
The construction plan should be adjusted according to the actual situation and ensure that it conforms to the relevant design documents.
Material preparation and inspection:
Prepare the materials required for construction, including slip form, steel bar, concrete, etc., and ensure that the materials meet the relevant standards.
Strict control and inspection of concrete raw materials to ensure that cement, sand, coarse aggregate, fly ash and other indicators are in line with the design and specification requirements.
Personnel training:
Carry out necessary training to the construction personnel, so that they are familiar with the operation rules and safety precautions of slip form construction.
The training content includes the key points of construction technology, equipment use and maintenance, safety measures, etc.
Equipment inspection and maintenance:
Check and maintain the slip-forming machine and its auxiliary equipment to ensure that the equipment is in good working condition.
In particular, the inspection and maintenance of the sliding form should be carried out regularly to ensure the flatness and service life of the form.
2. Quality control during construction
Template installation and adjustment:
Before the slip-form construction begins, the slip-form template should be installed correctly, and the flatness and verticality of the template should be paid attention to to avoid skew and deformation.
Adjust the height of the sliding mold machine according to the measured lofting elevation, and ensure that the bottom of the template has a proper gap from the base.
Reinforcement layout and connection:
Arrange the rebar according to the design requirements, and ensure that the position and spacing of the rebar meet the design requirements.
Pay attention to the fastness of the steel bar connection and the clearance between the steel bar and the slip form.
Concrete placement and vibration:
When concrete is poured, the pouring speed and thickness should be controlled according to the design requirements.
The vibration device of the sliding form machine is used for vibration compaction to ensure that the concrete is free of bubbles and segregation.
Pay attention to the slump of concrete at any time to maintain the continuity and stability of concrete.
Forming and finishing:
In the process of sliding mould machine, we should pay close attention to the quality of the forming curb, and find and deal with the possible defects in time.
After the completion of construction, timely arrange personnel to use a special supporting mold for the secondary surface of the completed curb to ensure the smooth surface.
Maintenance and slit cutting:
Cover and maintain the curb after forming to ensure that the maintenance time and conditions meet the design requirements.
Appropriate cutting machinery is used for slit processing, and the cutting time is controlled after the concrete strength reaches the specified value.
Third, quality inspection and acceptance after construction
Appearance inspection:
Check the appearance quality of the curb, including flatness, alignment, color, etc. to meet the design requirements.
Size check:
Use measuring tools to check the dimensional accuracy of the curb, including width, height, thickness, etc.
Strength detection:
Check the strength of the curb to ensure that it meets the design requirements.
Acceptance and record:
Organize relevant personnel to carry out quality acceptance, and record the acceptance result.
The important parameters and quality control points in the construction process are recorded in order to facilitate later analysis and improvement.
In summary, through the strict control of the preparatory work before construction, the quality control during construction and the quality inspection and acceptance after construction, the construction quality of the concrete curb sliding form machine can be ensured to meet the design requirements.
Q:4.How to deal with the failure of the concrete curb sliding form machine in the construction process?
A:
When the concrete curb slip-forming machine encounters a failure during construction, the following steps should be taken to deal with it:
First, stop the machine for inspection
Immediate shutdown: Once the fault is found, the operation of the sliding die machine should be stopped immediately to prevent further expansion of the fault or cause more serious consequences.
Cut off the power supply: ensure that the power supply of the sliding die machine has been cut off to avoid electric shock during maintenance.
Second, fault diagnosis
Observe the fault phenomenon: carefully observe the phenomenon when the fault occurs, such as vibration rod depression, mold deformation, walking difficulties, etc.
Analyze the cause of the failure: According to the fault phenomenon, combined with the structure and working principle of the sliding die machine, analyze the possible cause of the failure. For example, vibrator weakness can be caused by bearing damage, motor failure, or cracking of the wire shaft.
3. Troubleshooting
Simple fault handling: For some simple faults, such as poor electrical connections, loose fasteners, etc., you can repair yourself. For example, check and reconnect electrical wiring, tighten loose bolts and nuts, etc.
Complex fault handling: For complex faults, such as motor damage, mold serious wear, etc., you need to contact professional maintenance personnel or manufacturers for processing. While waiting for maintenance personnel to arrive, temporary measures can be taken, such as the use of spare motors or molds, to ensure that construction is not affected.
Iv. Preventive measures
Regular maintenance: Regular maintenance of the sliding die machine, including cleaning, lubrication, fastening, etc., to prevent the occurrence of failures.
Use quality accessories: Select quality accessories and materials to ensure the performance and life of the slip forming machine.
Standard operation: Use the sliding die machine in strict accordance with the operating procedures to avoid failure caused by improper operation.
5. Record and feedback
Record fault information: Record the time, place, symptom, cause, and handling method of a fault for subsequent analysis and improvement.
Feedback manufacturer: The fault information is fed back to the manufacturer or supplier of the sliding mould machine, so that they can understand the use of the product and improve product quality and service.
To sum up, when the concrete curb slip-forming machine encounters a fault in the construction process, it should be stopped for inspection, fault diagnosis, appropriate treatment measures, and strengthen preventive measures and record and feedback work to ensure the smooth construction and long-term stable operation of the slip-forming machine.
Q:5.How to choose the appropriate concrete curb sliding die?
A:
In order to ensure the quality and efficiency of construction, it is necessary to consider a number of factors to select the appropriate concrete curb sliding die. Here are some specific suggestions:
First, according to the construction needs to choose
Curb Type:
According to the requirements of road design, the suitable kerb types are selected, such as H, T, R, F, TF and P flat kerb.
Different types of kerbs have different requirements for the shape and size of the mold.
Size specification:
According to construction drawings or design requirements, determine the size of the curb, including length, width, height, etc.
Select the mold that matches the required size specifications.
Special requirements:
If the curb needs to have a special texture, color or function (such as drainage, non-slip, etc.), you should choose a mold that can meet these requirements.
Second, consider mold quality and durability
Material selection:
The material of the mold directly affects its durability and forming effect.
High-quality molds are usually made of wear-resistant and corrosion-resistant materials, such as high-quality steel or special alloys.
Manufacturing process:
The manufacturing process of the mold also affects its quality and durability.
Select molds made with advanced manufacturing processes (such as precision casting, CNC machining, etc.) to ensure their accuracy and durability.
Service life:
Understand the service life of the mold and evaluate the need for spare mold according to the construction plan.
Third, consider the construction environment and conditions
Terrain and climatic conditions:
Select the appropriate mold according to the terrain and climatic conditions of the construction site.
For example, in wet or rainy areas, choose a mold with better drainage performance.
Transportation and Storage:
Consider the ease of transportation and storage of molds.
Choose molds that are easy to handle, stack and protect to reduce damage during transportation and storage.
4. Refer to manufacturers and price factors
Manufacturer reputation and service:
Choose a manufacturer with good reputation and quality service.
Understand the manufacturer's production experience, technical strength, after-sales service, etc., to ensure the quality of the mold and after-sales service.
Price comparison:
Under the premise of meeting the quality requirements, compare the prices of different manufacturers and choose cost-effective molds.
To sum up, the selection of the appropriate concrete curb sliding die requires comprehensive consideration of construction needs, mold quality and durability, construction environment and conditions, as well as manufacturers and price factors. By comprehensively evaluating these factors, the most suitable mold for construction needs can be selected to ensure construction quality and efficiency.
Q:6.What preparation work should be done before the construction of the concrete curb sliding form machine?
A:
The following preparations need to be made before the construction of the concrete curb slip-forming machine:
First, equipment inspection and debugging
Check the sliding mould machine: ensure that the overall condition of the sliding mould machine is good, and the components are tightly connected without loosening.
Debugging equipment: Before the formal construction, the slip-forming machine is debugging to ensure that it can operate normally and meet the construction requirements.
2. Preparation of materials and tools
Concrete: Prepare enough concrete to ensure that its quality meets construction requirements.
Tools: Prepare measuring tools (such as levels and measuring tools), hand/power tools, and safety protective equipment.
Iii. Preparation of construction site
Site cleaning: Clean up the construction site to ensure that the site is smooth, the structure is stable, and there is no debris.
Site marking: According to the design drawings or construction instructions, determine the size and shape of the construction curb, and draw the corresponding boundary line on the site.
4. Reference line setting
Set up the reference line: set up the reference line at the construction site to ensure that the slip-forming machine can walk and form in accordance with the design requirements during construction.
Check the reference line: Check the erected reference line to ensure that its stability, accuracy, and perpendicularity meet the requirements.
5. Construction team organization
Determine the construction team: according to the construction scale and requirements, determine the appropriate construction team to ensure that the number and quality of personnel meet the construction needs.
Make construction plan: Make detailed construction plan, including construction process, time arrangement, labor division, etc., to ensure orderly construction.
6. Implementation of security measures
Safety protection: Set up necessary safety protection measures at the construction site, such as warning signs, enclosures, etc., to ensure the safety of construction personnel and surrounding people.
Training and education: Conduct safety training and education for construction personnel, improve their safety awareness and operational skills, and reduce safety hazards in construction.
Vii. Other preparatory work
Equipment maintenance: the necessary maintenance and maintenance of the sliding die machine before construction to ensure its stable performance and normal operation.
Emergency preparedness: Formulate emergency plans and prepare necessary emergency supplies and equipment to cope with possible emergencies.
To sum up, the concrete curb slipform machine needs to make adequate preparations before construction, including equipment inspection and commissioning, material and tool preparation, construction site preparation, reference line setting, construction team organization, safety measures implementation and other preparatory work. These preparations are an important prerequisite for ensuring construction quality, safety and efficiency.
Hot Tags: cement curb sliding machine, China cement curb sliding machine manufacturers, factory, cooling and heating building materials machinery, lubrication and maintenance building materials machinery
You Might Also Like
Send Inquiry
















