Truck Mounted Crane

When selecting the right Truck Mounted Crane model and specification, you need to consider the following factors: First, determine your operational requirements, including conventional lifting weight, working radius and lifting height. Second, consider your work environment, such as the size of the work site, ground conditions, and whether you need to transport long distances frequently. Finally, combined with your budget, comprehensive comparison of different brands and models of performance, price, after-sales service and other factors, choose the most cost-effective products. It is recommended to consult a professional seller or technical consultant for more specific advice.

When working in a rainy or humid environment, the electrical system and hydraulic system of the Truck Mounted Crane are vulnerable, so special attention needs to be paid to the following points: First, ensure that the electrical system of the crane has good waterproof measures to avoid short circuit or failure caused by rain infiltration. Secondly, regularly check the oil level and oil quality of the hydraulic system to avoid performance degradation or damage due to water mixing into the hydraulic oil. In addition, attention should be paid to non-slip during operation to ensure that the ground is solid and there is no water to prevent the crane from slipping or overturning. Finally, when working in a humid environment, operators should wear non-slip shoes and rainproof equipment to ensure their own safety.

The leg of Truck Mounted Crane is a key component to ensure the stability of the crane, and the following points should be noted when using it: First, before the leg is deployed, it must be ensured that the crane is parked on a flat and solid ground to avoid the leg sinking or tilting due to uneven or soft ground. Secondly, the legs should be deployed in accordance with the instructions in the manual, ensuring that each leg is firmly supported on the ground and adjusted to the appropriate height and Angle. At the same time, it should be checked whether the leg locking device is firm and reliable to prevent loosening or falling off during the operation. Finally, before lifting operations, stability checks should be carried out to ensure that the crane can remain stable under the maximum lifting weight and working radius.

The daily maintenance and maintenance of Truck Mounted Crane is an important measure to ensure its normal operation and extend its service life. The following are some suggestions: First, regularly check the oil level and oil quality of the hydraulic system, timely replace contaminated or aging hydraulic oil, and clean the hydraulic tank and filter. Secondly, check whether the connection wires and plugs of the electrical system are loose or damaged to ensure the normal operation of the electrical system. At the same time, the structural parts of the crane, such as the boom, leg, frame, etc., should be regularly checked for cracks, deformation or wear and other phenomena, and the damaged parts should be repaired or replaced in time. In addition, attention should also be paid to lubricating the transmission parts and rotating parts to maintain their flexibility and wear resistance. Finally, after each use, the crane should be cleaned and maintained, dust and dirt should be removed, and the components should be checked for alignment and locking.

Safety precautions are of Paramount importance when working at altitude with a Truck Mounted Crane. The following are some aspects that need special attention: First, ensure that the crane is in a stable state, the legs are firmly supported on the ground, and carry out stability checks. Secondly, operators should wear safety belts, helmets and other personal protective equipment, and strictly abide by the safety procedures for high-altitude work. At the same time, warning signs and warning areas should be set up to prevent irrelevant personnel from entering the working area. In the lifting process, the crane should be operated slowly and smoothly to avoid sudden actions such as rapid acceleration, rapid deceleration or sharp turns. In addition, we should also pay attention to the changes in the surrounding environment, such as wind, temperature, etc., and adjust the operation plan and safety measures in time. Finally, after the end of the operation, the goods should be put down in time and the lifting arm and leg should be recovered to ensure that the crane is in a safe state.